Paperboard packaging with a thin plastic barrier is an ideal compromise which combines paperboard’s stiffness for the construction with plastic’s impermeability for such purposes as a longer food lifespan. This type of packaging reduces the use of plastic and has far less climate impact than the equivalent packaging made only of plastic.
However, opinion has been divided over whether and how this type of packaging can be recycled. The answer depends mainly on which technology is available in each local market. This has been the case in the UK, which has lacked clear advice on how packaging made of such combination materials should be recycled.
At the beginning of 2020, the UK labeling organization OPRL (On-Pack Recycling Label) issued guidelines for how to recycle packaging made of paper and board with a plastic coating. The guidelines were developed in cooperation with the relevant industry organizations and specify which recycling label should be put on the packaging to advise consumers.
The new recommendations state that packaging can contain up to 15% plastic and still be classified as recyclable and be sorted in the wastestream for paper materials. As of January 2023, the permitted plastic content will be reduced to 10% of the packaging’s weight.
Gives time for development
“This is a good decision which establishes clear rules for a number of years ahead,” says Ginny Samuel, business development mgr.-Iggesund Paperboard. “Those of us who work with paper- and paperboard-based packaging have been challenged to develop solutions using less material but we’ve also been given time to do this.”
OPRL originally wanted to allow far less than 15% plastic content in fibre-based packaging. But increasing awareness of packaging’s climate impact has already persuaded numerous major brand owners to start replacing their all-plastic solutions. This is particularly the case with food packaging, where plastic is often necessary as a barrier against moisture, grease or aroma. Setting the limit for plastic content too low would have risked slowing down this development.
“One solution that’s very common in food packaging is to put the food in a tray, and plastic is most commonly used for this,” explains Jonas Adler, dir.-New Business Development at Iggesund Paperboard. “We can replace it with our combination material Inverform, which is a paperboard tray with a thin plastic barrier. But it currently has a plastic content of over 10%. Our solution reduces the packaging’s climate impact by 80%, so it would be a setback for sustainability work if this packaging solution were to be penalized.”
The goal of the paper and board industry is to reduce and eventually eliminate the use of plastic in this type of product – a step that requires new, fossil-free barriers. Development work is being done in many places, and new and increasingly better solutions will undoubtedly be presented in within the next few years.
OPRL’s guidelines are primarily intended for the UK market, and the question is how much will they influence other markets? “They will also be significant outside the UK,” Adler says. “Because so many strong brands are based there, these guidelines will definitely have an impact outside the British Isles.”
Adler also emphasizes that material manufacturers cannot bear all the responsibility for closing the recycling circle. “The recycling systems and their facilities must also be developed so that they can handle the new, resource-efficient material solutions. OPRL’s recommendation gives both them and the material producers time to adapt, and thereby creates the conditions to make the packaging industry even more circular."
More info: www.iggesund.com