Converting Quarterly title
The Official
Technical Magazine
of AIMCAL
small AIMCAL logo
  Search

Web Coating

Blogmaster: Dr. Edward D. Cohen

25 Latest Articles Current Articles | Archives | Search

Entries for December 2011

26

Limits of coatability

Posted by Edward Cohen on December 26, 2011
Limits of coatability
In all coating processes  there is an operating region in which a uniform, stable defect free coating can be made. Outside of that region the coating is not stable  and defective coatings will be made will be produced. There are several variables, solution flow rate & wet thickness, rh...

[Read the rest of this article...]

Posted in: Coating All Other, Coating Applicator Roll Coating, Coating Applicator, Slot Die, Slide, Curtain
Actions: E-mail | Permalink | Comments (1) RSS comment feed | del.icio.us
15

2012 AIMCAL Web Coating Webinars

Posted by Edward Cohen on December 15, 2011
I am in the process of developing the topics to be covered in the 2012 AIMCAL coating technology Webinar series. If there are any topics or presenters that you believe should be scheduled, send me the information. Ed Cohen
Posted in: Coating All Other
Actions: E-mail | Permalink | Comments (0) RSS comment feed | del.icio.us
13

Simultaneous Multilayer Coating Is A Practical Efficient Process

Posted by Edward Cohen on December 13, 2011
Simultaneous Multilayer Coating Is A Practical Efficient Process
One of the many technologies that will drive the growth of the web coating process (also called Roll-to-roll) is the development of Simultaneous Multilayer Coating process. Several technology and manufacturing advances have resulted in a process that has the ability to coat a wide range of propertie...

[Read the rest of this article...]

Posted in: Coating Applicator, Slot Die, Slide, Curtain
Actions: E-mail | Permalink | Comments (0) RSS comment feed | del.icio.us
10

Drying Defects: Blisters

Posted by Edward Cohen on December 10, 2011
Drying Defects: Blisters
Blisters are drying defects that are often encountered in the web-coating process. They can either be a small, dome-like protrusions or a small recessed in the dried coating film. They tend to occur all over the surface of the coating. While they appear as two different types, protrusions and depres...

[Read the rest of this article...]

Posted in: Dryers & Drying
Actions: E-mail | Permalink | Comments (1) RSS comment feed | del.icio.us
05

Where To Use Filters In The Coating Process

Posted by Edward Cohen on December 5, 2011
Where To Use Filters In The Coating Process
Comprehensive filtration is an efficient, low-cost method of reducing coating and drying defects that are the result of foreign material, contaminants, being introduced into the coated layer. In the ideal process these defects could be prevented by not introducing the contaminants at all components ...

[Read the rest of this article...]

Posted in: Coating Solution Handling
Actions: E-mail | Permalink | Comments (0) RSS comment feed | del.icio.us

Blogmaster

Edward Cohen photo

Dr. Edward D. Cohen

Dr. Cohen is a technical consultant in all aspects of the web coating process. His expertise includes thin film coating and drying process development, coating application and drying of thin films, polyester base development, film defect mechanisms, formulating coatings, image analysis techniques for characterizing coating films and litigation support.

He has over 45 years experience in coating research and manufacturing technology with the DuPont Company and as a technical consultant to the converting and composites industries

He has extensive publications in the field and has co-authored several books: Modern Coating and Drying Technology, Coating and Drying and Defects: Troubleshooting Operating Problems, and chapters in Kirk-Othmer Encyclopedia of Chemical Technology and Water and Solvent Based Coating Technology. His honors are the John Tallmadge Award for Contributions to Coating technology, the AIMCAL President's award in recognition of Meritorious Service to AIMCAL and the Converting Industry, and the ISCST Founders Award. He was the founding president of the ISCST. He has a Bachelor of Science in Chemical Engineering from Tufts University and a Ph.D. in Physical Chemistry from the University of Delaware.